feat: Add full-width mode toggle for wider views on large monitors. Related to #974

scripts/dev-deploy-agent.sh

@@ -0,0 +1,164 @@
+#!/bin/bash
+# Dev deployment script for Pulse agents
+# Usage: ./scripts/dev-deploy-agent.sh [host1] [host2] ...
+# Example: ./scripts/dev-deploy-agent.sh tower pimox minipc
+
+set -e
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+PROJECT_ROOT="$(dirname "$SCRIPT_DIR")"
+
+# Default hosts if none specified
+DEFAULT_HOSTS=("tower")
+
+# Target architecture (most home servers are amd64)
+GOARCH="${GOARCH:-amd64}"
+GOOS="${GOOS:-linux}"
+
+# SSH options
+SSH_OPTS="-o StrictHostKeyChecking=no -o ConnectTimeout=10"
+
+# Remote paths
+REMOTE_AGENT_PATH="/usr/local/bin/pulse-agent"
+REMOTE_SERVICE="pulse-agent"
+
+# Colors for output
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+YELLOW='\033[1;33m'
+BLUE='\033[0;34m'
+NC='\033[0m' # No Color
+
+log_info() {
+    echo -e "${BLUE}[INFO]${NC} $1"
+}
+
+log_success() {
+    echo -e "${GREEN}[OK]${NC} $1"
+}
+
+log_warn() {
+    echo -e "${YELLOW}[WARN]${NC} $1"
+}
+
+log_error() {
+    echo -e "${RED}[ERROR]${NC} $1"
+}
+
+# Get list of hosts
+if [ $# -eq 0 ]; then
+    HOSTS=("${DEFAULT_HOSTS[@]}")
+    log_info "No hosts specified, using defaults: ${HOSTS[*]}"
+else
+    HOSTS=("$@")
+fi
+
+# Build the agent
+log_info "Building pulse-agent for ${GOOS}/${GOARCH}..."
+cd "$PROJECT_ROOT"
+
+BINARY_PATH="$PROJECT_ROOT/bin/pulse-agent-${GOOS}-${GOARCH}"
+CGO_ENABLED=0 GOOS="$GOOS" GOARCH="$GOARCH" go build -ldflags="-s -w" -o "$BINARY_PATH" ./cmd/pulse-agent
+
+if [ ! -f "$BINARY_PATH" ]; then
+    log_error "Build failed - binary not found at $BINARY_PATH"
+    exit 1
+fi
+
+log_success "Built $(du -h "$BINARY_PATH" | cut -f1) binary"
+
+# Deploy to each host
+FAILED_HOSTS=()
+SUCCESS_HOSTS=()
+
+for host in "${HOSTS[@]}"; do
+    echo ""
+    log_info "Deploying to $host..."
+    
+    # Check if host is reachable and get architecture
+    HOST_ARCH=$(ssh $SSH_OPTS "$host" "uname -m" 2>/dev/null || echo "unknown")
+    if [ "$HOST_ARCH" == "unknown" ]; then
+        log_error "Cannot connect to $host or determine architecture - skipping"
+        FAILED_HOSTS+=("$host")
+        continue
+    fi
+    
+    # Map uname -m to GOARCH
+    case $HOST_ARCH in
+        x86_64)  TARGET_GOARCH="amd64" ;;
+        aarch64) TARGET_GOARCH="arm64" ;;
+        armv7l)  TARGET_GOARCH="arm" ;;
+        *)       log_error "Unsupported architecture: $HOST_ARCH"; FAILED_HOSTS+=("$host"); continue ;;
+    esac
+
+    log_info "  Host architecture: $HOST_ARCH (building for $TARGET_GOARCH)..."
+    
+    # Build specifically for this host's arch
+    BINARY_PATH="$PROJECT_ROOT/bin/pulse-agent-${GOOS}-${TARGET_GOARCH}"
+    if [ ! -f "$BINARY_PATH" ] || [ $(( $(date +%s) - $(stat -c %Y "$BINARY_PATH" 2>/dev/null || echo 0) )) -gt 60 ]; then
+        log_info "  Building pulse-agent for $TARGET_GOARCH..."
+        CGO_ENABLED=0 GOOS="$GOOS" GOARCH="$TARGET_GOARCH" go build -ldflags="-s -w" -o "$BINARY_PATH" ./cmd/pulse-agent
+    fi
+    
+    # Stop the service
+    log_info "  Stopping pulse-agent..."
+    ssh $SSH_OPTS "$host" "sudo systemctl stop $REMOTE_SERVICE 2>/dev/null || pkill -f pulse-agent || true"
+    
+    # Copy the binary
+    log_info "  Copying binary..."
+    if ! scp $SSH_OPTS "$BINARY_PATH" "$host:/tmp/pulse-agent-new"; then
+        log_error "  Failed to copy binary to $host"
+        FAILED_HOSTS+=("$host")
+        continue
+    fi
+    
+    # Install the binary
+    log_info "  Installing binary..."
+    if ! ssh $SSH_OPTS "$host" "sudo mv /tmp/pulse-agent-new $REMOTE_AGENT_PATH && sudo chmod +x $REMOTE_AGENT_PATH"; then
+        log_error "  Failed to install binary on $host"
+        FAILED_HOSTS+=("$host")
+        continue
+    fi
+    
+    # Start the service
+    log_info "  Starting pulse-agent..."
+    # Try systemd first, then Unraid go.d script, then manual start via existing scripts
+    if ! ssh $SSH_OPTS "$host" "sudo systemctl start $REMOTE_SERVICE 2>/dev/null"; then
+        if ssh $SSH_OPTS "$host" "test -f /boot/config/go.d/pulse-agent.sh" 2>/dev/null; then
+            log_info "  Using Unraid startup script..."
+            ssh $SSH_OPTS "$host" "bash /boot/config/go.d/pulse-agent.sh" >/dev/null 2>&1
+        elif ssh $SSH_OPTS "$host" "test -f /etc/init.d/pulse-agent" 2>/dev/null; then
+            log_info "  Using init.d script..."
+            ssh $SSH_OPTS "$host" "sudo /etc/init.d/pulse-agent start" >/dev/null 2>&1
+        fi
+    fi
+    
+    # Verify it's running
+    sleep 2
+    if ssh $SSH_OPTS "$host" "pgrep -x pulse-agent >/dev/null 2>&1"; then
+        log_success "  Agent deployed and running on $host"
+        SUCCESS_HOSTS+=("$host")
+    else
+        # Try one last ditch effort: run it via the background helper if we can find it
+        log_warn "  Agent not running, checking logs..."
+        ssh $SSH_OPTS "$host" "tail -n 5 /var/log/pulse-agent.log /boot/logs/pulse-agent.log 2>/dev/null" | log_warn
+        FAILED_HOSTS+=("$host")
+    fi
+done
+
+# Summary
+echo ""
+echo "========================================"
+log_info "Deployment Summary"
+echo "========================================"
+
+if [ ${#SUCCESS_HOSTS[@]} -gt 0 ]; then
+    log_success "Successfully deployed to: ${SUCCESS_HOSTS[*]}"
+fi
+
+if [ ${#FAILED_HOSTS[@]} -gt 0 ]; then
+    log_error "Failed to deploy to: ${FAILED_HOSTS[*]}"
+    exit 1
+fi
+
+log_success "All deployments complete!"

scripts/watch-agents.sh

@@ -0,0 +1,61 @@
+#!/bin/bash
+# Automatic Agent Hot-Reload Watcher
+# Watches for local code changes and pushes to all agents
+
+set -e
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+PROJECT_ROOT="$(dirname "$SCRIPT_DIR")"
+DEPLOY_SCRIPT="$SCRIPT_DIR/dev-deploy-agent.sh"
+
+# Hosts to sync to (edit this list as needed)
+HOSTS=("verdeclose" "minipc" "delly" "pimox")
+
+# Colors
+GREEN='\033[0;32m'
+BLUE='\033[0;34m'
+YELLOW='\033[1;33m'
+NC='\033[0m'
+
+log_info() {
+    echo -e "${BLUE}[WATCHER]${NC} $1"
+}
+
+if ! command -v inotifywait &> /dev/null; then
+    echo "Error: inotifywait not found. Install with: sudo apt install inotify-tools"
+    exit 1
+fi
+
+log_info "${GREEN}Starting Agent Hot-Reload Watcher...${NC}"
+log_info "Target hosts: ${HOSTS[*]}"
+log_info "Watching internal/, pkg/, and cmd/pulse-agent/ for changes..."
+
+# Debounce deployment to prevent multiple builds for rapid saves
+LAST_DEPLOY=0
+DEBOUNCE_SEC=2
+
+cd "$PROJECT_ROOT"
+
+# Use inotifywait to watch relevant directories
+inotifywait -m -r -e modify,create,delete,move \
+    --exclude ".*\.test\.go" \
+    "$PROJECT_ROOT/internal" \
+    "$PROJECT_ROOT/pkg" \
+    "$PROJECT_ROOT/cmd/pulse-agent" | 
+while read -r path action file; do
+    # Only trigger for .go files
+    if [[ "$file" == *.go ]]; then
+        NOW=$(date +%s)
+        if (( NOW - LAST_DEPLOY > DEBOUNCE_SEC )); then
+            echo ""
+            log_info "${YELLOW}Change detected in $path$file. Deploying...${NC}"
+            
+            # Execute deployment in background so we don't miss other events
+            # but wait for it so we don't overlap builds
+            "$DEPLOY_SCRIPT" "${HOSTS[@]}" || true
+            
+            LAST_DEPLOY=$(date +%s)
+            log_info "${GREEN}Ready for next change.${NC}"
+        fi
+    fi
+done